Skip to content
GT40 Adjustable steering column

The GT40 was designed for a single purpose, and driver fit & comfort weren’t on that list. So how do you make it fit you, your spouse, and the next owner? While I spent my delivery time searching the innerwebs, I followed Tom Schwab (Eglitom on the GT40s forum). He found and fitted a VW adjustable steering column to the RCR build. As my build progressed, Fran ran into issues with steering column suppliers and was developing his own rack. As it turned out, the new RCR rack and the VW Fox column fit together exactly; we only had to modify the universal joint to the rack and the steering column to the steering wheel hub adapter.

Steering rack

Steering ColumnThe steering rack from a Volkswagen Fox 2005-2011 was the basis of the design. The Fox model is the one built for the European market during those years, not the earlier version (87-93) for the US Market. Fortunately, it was a very popular version and spare/used parts are readily available on eBay. A little searching and I was able to snag one, complete, shipped to the US for less than $70

VW Part No: 5Z2419501L

With modification, I was able to use the center bearing and adapt it to mount on the tray under the dash area. The end universal joint had to be modified to fit the D-shaft shape of the new RCR rack.

Dash Supports

The steering column bolts to the dash using two square tube brackets. The longer strap bolts to the face of the cowl edge. The smaller ends incorporate welded studs and bolt the the lower tray. The tubes are drilled to adapt to the plates on the steering rack

Center bearing and tray mod's

The under-dash tray is notched and drilled to accept the supports. The bearing is modified to fit and pivot between the two supports

Universal Joint - Rack connection

The VW universal joint is a splined joint with a clamp bolt. The RCR rack is a 3/4″ D-Shaft. With a die grinder and a lot of adult beverages, the joint can be opened up to mate the D-Shaft shape and retain the same clamp bolt.

With all this in place, the VW rack bolts up to the chassis and the rack and the collapsable shaft and fore-aft / up-down functions all work exactly as designed.

The dash fiberglass opening does have to be modified slightly to fit the mechanism so you get more ‘arts-n-crafts’ work to finish it.

Removable wheel hub

My build hasn’t progressed far enough to provide input or pictures, yet. I have yet to determine the exact method of adapting the two, other than I know it will be welded together, once finished. I am thinking a threaded adapter to center the splined adapter and then the pieces all welded together. 

Stay tuned for more details

More
articles

Designed using Unos Premium. Powered by WordPress.